VIDEOMAN DVR-Black16 Guía de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
15 VIDEOMAN
.VIDEOMAN Digital.
full, it will start to overwrite from the first volume.)
--- No save on warning : Stop recording once warning message is on
-- Disk Event : Configure event when message shows up. (Refer to 5-7. Event setup
)
- Setting log off timeout : This feature allows the administrator to set the amount of time
available for each logged-in session.
- Burn CD : Type in the path to CD burning program (CD burning program will start once CD
Burn button is selected in Search program)
5-4. Camera
5-4-1. General
: If selected, the settings selected in “General”, “Schedule”, “Color & Motion” will be
applied to all the cameras.
If you would like to customize each camera uniquely, select a camera from the buttons on the left of
the menu (1-16) FIRST, then choose the following options
Enable Camera : Enable or disable camera. (Ch1 camera is always enabled.)
Basic setting
- Camera name : Enter name of the camera. (Name will be displayed in Main screen.)
- Resolution: Choose the desired resolution for the camera. (Note: the higher the resolution size
of the recording will lead to a slower frame rate..)
Adjust camera frame rate
- Maximum averaged frame rate: Sets the recorded frame rate to the highest possible
available for installed Capture board.
- Select frame rate by camera : Allows manual setting of the frame rate.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

Comentarios a estos manuales

Sin comentarios